Starting a schedule – Turning Technologies Triton Proctor Application User Manual
Page 9
Triton Data Collection System
9
tritondatacollectionsystem.com/triton-support
STARTING A SCHEDULE
A Schedule must be started to enter the Exam Room.
How to start a Schedule...
1
Plug in the Proctor receiver.
Proctor Receiver
2
Open and log into the Triton Proctor Application.
A list of available Schedules is displayed.
3
Locate the desired Schedule, select the Schedule and click the Start Schedule icon.
The Exam Room is displayed.
Next Steps
Now that a Schedule has been started it is time to administer the exam. For more information, see
State
Displays the status of the Schedule. There are six Schedule states:
•
Ready - The Schedule is available for testing.
•
Recovery - A Schedule may be in a state of recovery if one of these conditions exist:
one or more cards has started a exam but has not done a final send or the Proctor has
not done a final save on at least one Answer Document.
•
Makeup - One or more Participants are in a Makeup state in the application.
•
In Progress - A Schedule is in progress when an Answer Document has been
administered and finalized, but not all Answer Documents in the Schedule have been
finalized.
•
Saved - The session has been saved but not uploaded to Triton Web.
•
Uploaded - The session has been successfully saved to Triton Web.
Name
The name of the Schedule.
Participant List
The name of the Participant List associated to the Schedule.
Site
The name of the Site.
Begin Date
The date at which the Schedule becomes available for administration.
Makeup Date
The makeup date is a reminder that makeups should be started near this date. Makeup
dates are typically halfway between the begin and end dates.
End Date
The date after which the Schedule is no longer available for administration.
Recovery Room