Turning Technologies TurningPoint - Manual (Page 125)

TurningPoint for Office 2007 User Guide 125
Response Device Management
Response Device Management
Each audience participant uses a device to respond to questions asked during the presentation.
TurningPoint needs to know what type of response devices will be used before the presentation is ran.
Access the Response Device settings to confirm TurningPoint is configured properly.
This section describes how to:
• Add or Update Response Device Receivers
• Enable ResponseWare
• Configure PresenterCard
• Check Device Communication
• Identify the Number of Devices to be Used
Add or Update Response Device Receivers
The Response Device settings may need to be accessed the response device receivers have been changed.
Before You Begin
TurningPoint must be installed on the computer to be used for the presentations and response device
receiver and ResponseCards at hand.
1 Connect the device receiver to the USB port of the presentation computer.