Turning Technologies TurningPoint - Manual (Page 260)

TurningPoint for Office 2007 User Guide 260
Manage and Edit Sessions
Delete Results from a Session
You can use the same presentation to create a new set of responses. The Reset menu on the TurningPoint
Ribbon gives you the option of deleting the results from slides in order to redo a session or present a new
session. The slide results will still be stored in the session data, but the slide will be cleared so it can be
used in a new presentation. You also have the option to redo only one question slide in a session.
Before You Begin
If you want to view the results at a later time, save the session before proceeding with the following steps.
To delete the results of a session from a slide…
1 Open the presentation. To delete the results of one question only, the slide with this question should
be in view.
2 Click Reset on the TurningPoint Ribbon.
The Reset menu opens, showing the options to reset either the entire session, all the slides, or the
current slide.
3 When you are ready to delete the results from the slide, select either Session, All Slides, or Current Slide.
• Selecting Session resets the values to zero for every slide in the presentation and clears all of the
results from the temporary session file by removing all of the response and participant data.
• Selecting All Slides resets the values to zero for every slide in the presentation.
• Selecting Current Slide resets the values to zero on only the currently viewed slide.
Note
You cannot undo the Reset function, so be certain
that you wish to delete the results from the slide.
Note
Be certain that you wish to delete the results from the
slide. You cannot undo the Reset function for the
Session, All Slides, or Current Slide options.