Turning Technologies TurningPoint - Manual (Page 21)

TurningPoint for Office 2007 User Guide 21
Step Two: Set Up the Response Devices
Next Steps
Slides can be customized with a variety of animated feedback mechanisms. Find more information about
these objects and other features in Chapter 3: Creating and Saving Slides.
Step Two: Set Up the Response Devices
Each audience participant uses a response device to respond to the questions asked during the
presentation.
TurningPoint supports a variety of response devices including infrared and radio frequency
ResponseCards as well as ResponseWare.
Before You Begin
TurningPoint must be installed on the computer to be used for the presentations. You also must have the
USB Response Device Receivers and Response Devices available for testing.
To set up the response devices…
1 Connect the device receiver to the USB port of the presentation computer.
Connect the USB Response Device Receiver to your computer. Windows detects the receiver and
installs the proper drivers. The device is now ready for use.
Infrared and Radio Frequency Response Device Receivers
Note
TurningPoint supports only the ResponseCard
family of keypads.