Ubiquiti Networks airFibe24 - Manual (Page 26)

There are three methods for determining the received signal level:
• LED Display (described above)
• airFiber Configuration Interface
• Audio tone (optional equipment required)
Refer to the airFiber AF-24 User Guide for instructions on the
airFiber Configuration Interface and audio tone methods. The User
Guide is available at: documentation.ubnt.com
Installer Compliance Responsibility
Devices must be professionally installed and it is the professional
installer's responsibility to make sure the device is operated within
local country regulatory requirements.
The Frequencies and Output Power fields are provided to the
professional installer to assist in meeting regulatory requirements.
24
airFiber® AF-24 Quick Start Guide