UVP 81-0357-01 PCR Hoods User Manual
Page 9
Advertising
PCR Workstations and Cabinets
Page 9
5. Tuck all of the connected wires between the Inner and Outer Back Panels.
6. Slide the Top Assembly down so that the side Makrolon
®
Panels are inside the Top Assembly
channels. Make sure that the back flange of the Top Assembly is positioned between the Inner
Back Panel and Outer Back Panel.
7. Secure and tighten the Top Assembly to the Back Panel Assembly with screws, pushing from the
back to ensure that the screws are secure.
8. Slide the Shelves into the Shelf Bracket.
Flange
Screw locations
Shelf Bracket
Top Assembly
Advertising