Vermona fourMulator - quad modulation engine - Manual (Page 17)

• Doepfer: A-150/A-151/A-152 Switches, A-160 Clock Divider, A-161
Clock Sequencer
• Intellijel Designs: µStep-sequencer
• Make Noise: Brains
• The Harvest Man: Stillson Hammer
• ... as well as Drum/Percussion modules by MFB, Analogue Solutions,
Tip Top Audio, Cwejman
Soft Edges
Jumping value changes are typical for sample & hold modulations. In
some cases, these changes are too abrupt. Here, the use of a slew-limiter
(e.g. Doepfer A-170, Analogue Systems RS-350) can be a good corrective
when patched to the WAVE output. Value jumps are now attenuated and
with careful use, you can even achieve an organic sounding vibrato
sounding more natural than a typical sine wave LFO.
A slew-limiter is also useful in combination with square waves. It turns
the curve into a trapezoid wave form which is advantageous when creat-
ing tremolo effects.
Technical Data
• Dimensions: 3 rack units/ 34HP
• Power consumption: max. 100 mA
• Connections (3.5mm TS)
• WAVE OUT: -5 to +5 volts
• Trigger impulses (CLK OUT, TRIGGER): 50ms, 12V
• CV IN: -5 to +5 volts
• min. input voltage RESET: +4V
• Frequency range: 0,05 Hz - 100 Hz
Owner's Manual VERMONA Retroverb Lancet
- 17 -