Vermona fourMulator - quad modulation engine - Manual (Page 7)

Picture 1: Connecting the fourMulator to the system bus
4. Mount the fourMulator to your modular frame. The unit requires a
width of 34 HP (horizontal pitch) and is rack-mounted with the four
supplied screws.
NOTE To protect the unit's surface of scratches, use
the supplied flat plastic washers.
5. Reconnect the power chord to your frame and switch on the power-
supply. The module is now ready to work. The four green LEDs for
the four LFOs as well as both red clock LEDs will now blink accord-
ing to the set tempo values.
Learn how to connect the different in- and outputs to the other modules
of your system in the next chapters of this manual.
fourMulator
ribbon cable
system bus
-12 V -12 V
Owner's Manual VERMONA Retroverb Lancet
- 7 -