Waldorf Lector - Manual (Page 30)

The Controls in Detail
Lector User´s Manual 30
Synthesis Filter Bank
Here you can control the parameters regarding to the
synthesis functions of the Vocoder. Besides the static
offset of the frequencies and the resonance of the
bandpass filter you can also set up a modulation for the
filter frequencies. An additional equalizer can Ein
nachgeschalteter Equalizer kann optimize the articulation
of the vocoder signal.
Low Offset -100...+100%
Sets the relative offset of the lowest synthesis band
compared to the lowest analysis band. A setting of 0
indicates that analysis and synthesis bands are exactly
matching. Negative values indicate that the synthesis
bands have been moved below the analysis bands, while
positive values indicate that the highest synthesis band
has been moved higher than the highest analysis band.
High Offset -100...+100%
Sets the relative offset of the highest synthesis band
compared to the highest analysis band. A setting of 0
indicates that analysis and synthesis bands are exactly
matching. Negative values indicate that the synthesis
bands have been moved below the analysis bands, while
positive values indicate that the highest synthesis band
has been moved higher than the highest analysis band.
Resonance -100...+100%
Sets the steepness of the Vocoder filter. The higher the
value, the more the Vocoder bands will resonate.
w
Increasing the Vocoder Resonance can increase the
intelligibility of the Vocoder signal.