Waldorf Lector - Manual (Page 32)

The Controls in Detail
Lector User´s Manual 32
•
Random generates random values and glides to
them linearly.
• S&H (Sample & Hold) samples a random value
and holds it until the next value is generated. If
Speed
is set to 0, a random value is generated on
each new note.
LFO Speed 0.01...10 Hz / 8 Bar...1/64t
Determines the frequency of the LFO. At low values, it
might take some time for the LFO to perform a complete
cycle.
When the LFO Sync parameter is set to On, you can
adjust the Speed in musical values.
LFO Sync On / Off
When Sync is activated, the LFO is synced to the song
tempo of the host application. The LFO Speed setting
changed to offer musically meaningful values.
Equalizer
Lector offers an equalizer to adjust the Vocoder signal.
This equalizer differs from a regular equalizer because it
offersd a proportional gain control fort he synthesis bands.
This equalizer doesn´t offer a shelving or peak
characteristic, it provides a linear gain increasing or
descreasing form the middle band to the lowest and
highest band.
Equalizer Active On / Off
Switches the equalizer on or off. The switch lights red
when activated.
Bass / Treble -20...+20 dB
Controls the overall balance of all synthesis bands by +/-
20 dB. Identical values will result in equal filter volume
across the range; different values will change the low and
high balance. All filters in-between are scaled
proportionally.
Mid Frequency 1...numbers of bands
Selects the band to be controlled by Mid Gain. The
surrounding bands are scaled to match the level of the
mid EQ.
Mid Gain -20...+20 dB
Cuts or boosts the selected Mid Frequency by +/- 20 dB.