DigiTech RP21D - Manual (Page 19)

Once you have accessed page 2 of the Tube Distortion, the display will look something like this:
The display it now telling you three more things about the Tube Distortion parameters.
1. This parameter is the Tube Distortion Type. There are four types of Tube Distortion to choose from including Warm Clean, Bright Clean,
Dirty Tube, and Saturated Tube. The number 2 icon is telling you that in order to access the Tube Distortion Type, you must press the
number 2 button. You can then select the Type of Tube Distortion by rotating the Data Wheel.
2. This is the Tube Distortion Gain parameter. The Gain is the amount of distorion and is adjustable from 0 to 100. The number 4 icon is
telling you that in order to access the Gain parameter, you must press the number 4 button. You can then change the Tube Distortion Gain
value by rotating the Data Wheel.
3. This section of the display is telling you that you are on page 2 of 2. There are no more pages of parameters to display. Pressing the Next
Page button will wrap around to page 1 of 2.
Saving a Distortion Default
If you made any changes to the Tube Distortion parameters, you can save your changes to a user default for the Tube Distortion. This will
allow you to quickly recall all of these Distortion settings when creating another Program just by choosing the user default. To save your
Tube Distortion settings to a user default, you will have to return to page 1 of 2, and the display will look something like this:
The number 3 icon is telling you that in order to store your Tube Distortion settings to a default, you must press the number 3 button. Once
you press the number 3 button, the RP21D will take you into a naming menu to give your Tube Distortion default setting a custom name. See
page 21 for more information on naming functions.
NOTE: The Store option for saving a Tube Distortion default will not appear if you did not make any changes to the Tube Distortion
parameters.
Tube Distort Custom
4
FACTORY USER
%kHz
msdB On 1
CHANGED LINK
%kHz
msdB 2
CHANGED LINK
%kHz
msdB Sto 3
LINK
%kHz
sdB --- 4
LINK
PAGE
1
OF
2
COMP WAH TUBE EQ
L/R OUTS
DIGITAL
CLIP
# b
GATE
SEAMLESS
BANK
EQ DIST
1
Type: Dirty Tube Gain
4
FACTORY USER
%kHz
msdB 1
CHANGED LINK
%kHz
msdB 2
CHANGED LINK
%kHz
msdB 3
LINK
%kHz
msdB 45 4
LINK
PAGE
2
OF
2
COMP WAH TUBE EQ
L/R OUTS
DIGITAL
CLIP
#
b
GATE
SEAMLESS
BANK
EQ DIST
1 2
3
3 2
14
RP21D User’s Guide Section Two - Editing Functions