Specifications, General – DigiTech RP21D User Manual
Page 67
Specifications
Input Section
Connector:
1/4” Unbalanced
Nominal Value:
-8 dBu
Maximum Level: +10 dBu
Impedance:
470 ohms
Output Section
Connector:
(2) 1/4” TRS Impedance Balanced
Nominal Level:
+4 dBu
Maximum Level: +18 dBu
Impedance:
50 ohms
Digital Section
A/D Converter:
20 bit 128x Oversampled
D/A Converter:
20 bit 128x Oversampled
Sampling Rate:
44.1kHz.
Output:
S/PDIF
DSP Section
Architecture:
Static-Dynamic Instruction Set Computer (S-DISC II™)
Digital Signal Path Width:
24 bits (144.5 dB)
Internal Data Path:
48 bits (289 dB)
Dynamic Delay Memory:
256k x 24 bits (5.94 seconds)
Static Delay Memory:
256 24-bit registers (6.55 milliseconds)
Data ALU Processing:
10.0 MIPS
Address ALU Processing:
15.0 MIPS
Multiplier Size:
24 bits x 24 bits
General
Frequency Response:
20 Hz to 20 kHz +0, -3 dB
S/N Ratio:
Greater than 90 dB: ref= max signal, 22 kHz measurement bandwidth
THD:
Less than 0.04% (1 kHz)
Tube:
12AX7
Tube Plate Voltage:
145 Volts
Factory Programs:
128
User Programs:
128
Dimensions:
24” W x 8.25” D x 2.25” H
Net Weight:
12 lbs.
Shipping Weight:
13.5 lbs.
62
RP21D User’s Guide Section Five - Appendix