DigiTech RP21D - Manual (Page 40)

Pan Controls the stereo soundfield placement of the delay. Ranges from -99 (all left) to 99 (all right).
Out L - R Adjusts the left or right output level of the Delay. Ranges from Off to 100%.
Out A - B Adjusts the output level of delay voice A or B. Ranges from Off to 100%.
Pan A - B Controls the stereo soundfield placement of delay voice A or B. Ranges from -99 (all left) to 99 (all right).
Out C - D Adjusts the output level of delay voice C or D. Ranges from Off to 100%.
Pan C - D Controls the stereo soundfield placement of delay voice C or D. Ranges from -99 (all left) to 99 (all right).
Out LA - LB Adjusts the left-side output level of delay voice A or B. Ranges from Off to 100%.
Out RA - RB Adjusts the right-side output level of delay voice A or B. Ranges from Off to 100%.
Out LC - LD Adjusts the left-side output level of delay voice C or D. Ranges from Off to 100%.
Out RC - RD Adjusts the right-side output level of delay voice C or D. Ranges from Off to 100%.
Multi Effects Modules - Chorus/Delay and Flange/Delay
The RP21D Multi Effect Modules allow the User to combine either Delay and Chorus or Delay and Flange within one Effect module block.
This is ideal for situations where the User needs to add another effect to the Effect Configuration, but is running low on signal processing
resources. Within the module, there is a unique parameter that allows you route the signal several different ways between the two effects.
Multi-Effect Module Parameters
FX: Lvl
Controls the signal input level fed to the Module. Ranges from Off to 100%.
Dry: Lvl Controls the level of the dry (uneffected) signal. Ranges from Off to 100%.
Balance Controls the positioning of the dry signal in the stereo soundfield. Ranges from -99 (all left) to 99 (all right).
Route Selects the route signal path within the Chorus/Delay, and Flange/Delay Multi effects modules. The 3 settings are: 1)
Chorus/Flange into Delay with feedback into the Delay 2) Chorus/Flange into Delay with feedback into Chorus/Flange
3) Delay into Chorus/Flange with feedback thru the Chorus/Flange.
Speed Controls the Low Frequency Oscillator (LFO) Speed of the Chorus or Flanger. Ranges from 0.06 to 16.0 Hz.
Depth Adjusts the intensity of the Chorus or Flanger effect. Ranges from 0 to 30 milliseconds.
Feedback (Flanger) Controls how much of the flanged signal is fed back to the input of the Module. The FDBACK Parameter is what gives
flangers their distinctive voice. Flangers are capable of both positive and negative feedback loops, so experiment to
find the sound you like best. Ranges from -99% to 99%.
WvFrm Selects which waveform the LFO follow. Options for this control include: Sine, Triangle, SP1 (Special 1), and SP2
(Special 2).
35
RP21D User’s Guide Section Two - Editing Functions