Z-Systems z-Q6 six-channel mastering equalizer - Manual (Page 9)

z-Q6 manual
9
To retrieve a collection of 50 presets from a MIDI sequencer, again make sure you have the z-Q6’s
MIDI channel number set to the same channel as the MIDI sequencer. Press the button below the
READ message and then begin to play the MIDI system exclusive stream from your MIDI
sequencer. The preset counter will again count backwards, letting you know that the z-Q6 is
indeed receiving and decoding the system exclusive commands. When the z-Q6 has decoded the
last preset from the MIDI sequencer, it will jump to EQ mode and will be ready for either normal
user input via the knobs and buttons or for MIDI program change commands.
To execute MIDI program change commands, simply make sure the MIDI sequencer is set to the
same MIDI channel as the z-Q6 and begin sending program change commands. The z-Q6 will
jump to the preset number indicated by the program change, with the display updated to show
the parameter changes. If an invalid program number is sent to the z-Q6, it will be ignored.