Ingenico ict220 - Manual (Page 22)

Page 21
6. If not entered earlier in the process, key in the amount
of the transaction and press the GREEN button.
The terminal will now dial for authorisation. The
authorisation code will be displayed. Press the GREEN
button.
7. A receipt will now be printed. Obtain the customer’s
signature. If the signature is OK, press the GREEN button. If
it is not, press the YELLOW button and the transaction will
be voided.
8. The signed receipt should be kept for your records.
The terminal will now print a receipt for the customer.
Pass the receipt to the customer and the transaction is
complete.
IF YOUR TERMINAL IS CONFIGURED FOR CSC/AVS (A CARDHOLDER VERIFICATION SERVICE) PROCEED AS
FOLLOWS.
<transaction type>
Key in Amount:
0.00
and then press ENTER
SALE
Signature OK?
Enter=YES Clear=NO
<transaction type>
Key in Security Code:
and then press ENTER
<transaction type>
AUTH CODE: nnnnn
<Acquirer Name>
press ENTER
Key in First Five Digits
Of the Address:
and then press ENTER
Key in Numerics From
The Post Code:
and then press ENTER
If you see this prompt, key in the 3 digit security code,
which can be found on the signature strip on the back of
the customer’s card. Now press the GREEN button.
NOTE: The security code for American Express cards is a
four digit code and can be found on the front of the card.
Your terminal may then prompt you to do the following:
Enter the numeric digits from the customer’s
Post Code, (i.e EH11 9YE would be entered 119)
and then press the GREEN button.
Enter the customer’s house number, ( i.e Flat 5,
29 High Street would be entered 529) and then
press the GREEN button.
10. The terminal will now dial out for authorisation and
the authorisation code will be displayed. Press the GREEN
button.
9. If this is a mail order transaction, the YELLOW button will be pressed when asked if the customer
is present.
If not entered earlier in the process, key in the amount of the transaction and press the GREEN
button.