Abbott Freestyle Lite - Manual (Page 24)

22
ENGLISH
ESP
AÑOL
Setting the Time
With the hour blinking, press the “ 1. c” button
until the correct hour appears. The default for
the meter is the 12-hour time format. The “P”
displays for “PM” times.
Press the “
2. m” button to move to minute
setting.
With the m
3. inute blinking, press the “c” button
until the correct minute appears.
Press the “
4. m” button to move to “Setting the
Time Format.”
Setting the Time Format
With the hour mode blinking, press the “ 1. c”
button to move between 12-hour and 24-hour
format. The time automatically updates to the
format selected.
Press the “ 2. m” button to move to “Setting the
Date.”
There are three sound volume options to let you know when the test
strip is full, when the reading is done, and when an error occurs:
Press the 1. “c” button until the desired sound level appears
Press the 2. “m” button to move to “Setting the Time.”
Setting the Sound
There are three (3) sound volume options:
Off Low High
Minute
Hour
Time Format