Meter maintenance battery, Replacing the battery – Abbott Freestyle Lite User Manual

Page 29

Advertising
background image

27

Call Customer Care Toll Free at 1-888-522-5226 www.AbbottDiabetesCare.com

ENGLISH

Meter Maintenance

Battery

Your FreeStyle® Lite Meter comes with one preinstalled, #2032,

3 volt, lithium battery. The battery provides enough power for the

meter to perform about 500 tests. If your battery runs low, the battery

symbol (

) appears on every display screen until you change the

battery. When the battery runs low, the display backlight and test light

may not power on.
Important: When this symbol appears, or when the backlight and test

light begin to dim, you should replace the battery immediately.

To avoid losing the time and date settings, replace the battery within

one minute of removing the old battery.
If you take more than one minute to replace the battery, you may

need to reset the time and date to get the correct 7-, 14- and 30-day

averages. If the time and date settings are lost, the time and date

displays flash 12:00 and 00-00 until they are reset.
Removing the battery does not affect the meter’s memory log or

previously-stored user settings (such as date and time format).
Even if you lose your time and date settings – you can perform a

blood glucose test, and results will not be affected.

Replacing the Battery

Turn the meter over. Press in the battery

door clip to open. Swing the battery door up
to open and then off the meter.

To remove the battery, push the battery

downward to release the battery.

1

Advertising