Pontiac 2004 Grand Am - Manual (Page 114)

O
(Exterior Lamps): Turn the outside part of the
lever with the symbol on it, to operate the lamps.
The exterior lamps control has three positions:
< (Parking Lamps): Turn the control to this position
to turn on the parking lamps, together with the
following.
• Sidemarker Lamps
• Taillamps
• License Plate Lamps
• Instrument Panel Lights
3 (Headlamps): Turn the control to this position to
turn on the headlamps, together with the previously
listed lamps and lights.
AUTO: Turn the control to this position to turn the
headlamps, taillamps and parking lamps on and
off automatically while the ignition is on, by sensing how
dark it is outside. For more information see “Automatic
Headlamp System” later in this section.
Headlamp High/Low-Beam Changer
To change the headlamps from low beam to high beam,
push the turn signal/multifunction lever away from you.
When the high beams are
on, a light on the
instrument panel cluster
will come on if the ignition
is in ON.
To change the headlamps from high beam to low beam,
pull the turn signal lever toward you.
Flash-to-Pass Feature
This feature lets you use your high-beam headlamps to
signal a driver in front of you that you want to pass.
To use it, pull the turn signal/multifunction lever toward
you until the high-beam headlamps come on, then
release the lever to turn them off.
3-8