Ryobi P2400 - Manual (Page 9)

9
ASSEMBLY
TRIGGER
UNPACKING
This product requires assembly.

Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Home and Garden Sprayer
Hose
Spray Wand
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to heed
this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
ATTACHING THE HOSE
See Figure 2.
To attach the hose:

Insert the hose end into the hose port as shown. Make
sure the connection is secure.
 Slide the cap over the hose port and hose end. Hand
tighten as shown. Do not overtighten.
ATTACHING THE SPRAY WAND
See Figure 3.
To attach the spray wand:

Slide the cap over the spray wand.
Fig. 2
SPRAY
WAND
CAP
HANDLE
SLIDE CAP
OVER WAND
INSERT WAND
INTO HANDLE
TO TIGHTEN
CAP
 Insert the spray wand into the handle until it stops. Do
not force.
 Slide the cap down over the spray wand and hand tighten
as shown.
Fig. 3
HOSE
PORT
HOSE
END
CAP