Introduction, Validity of documentation, Retaining the documentation – Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC User Manual
Page 7: 1introduction, 1 validity of documentation, 1 retaining the documentation
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
1-1
1.1
Validity of documentation
1
Introduction
11000
Introduction
Introduction
1-
1.1
Validity of documentation
1100
Validity of documentation
1-
Einf Gltigkeit der Dokumentation
This documentation is valid for the product PMCprotego S1. It is valid
until new documentation is published.
][BA_Einfhrung_Einleitung
This operating manual explains the function and operation, describes
the installation and provides guidelines on how to connect the product
PMCprotego S1
.
Einf_Dokumente
Please also refer to the following documents from the motion control
range:
The configuration of the expansion card is described in the online help
for the Configurator PASconfig SDrive.
The servo amplifier PMCprotego D is described in the
"PMCprotego D operating manual".
Details of how to set the parameters for the servo amplifier are de-
scribed in the online help for the PDrive commissioning software.
All these manuals can be found on the supplied CD-ROM: "Motion Con-
trol".
You will need to be conversant with the information in these documents
in order to fully understand this manual.
1.1.1
Retaining the documentation
Retaining the documentation
1-
Einf Aufbewahren
This documentation is intended for instruction and should be retained
for future reference.