Pilz PMCtendo DD5.03/000/0/0/0/110-230VAC User Manual
Pmctendo dd5
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Operating Manual PMCtendo DD5
- Preface
- Contents
- 1 Introduction
- 2 Overview
- 3 Safety
- 4
Function description
- Overview
- Power element
- Control element
- Expansion cards
- Switch on/switch off behaviour
- Implementation of stop categories
- 5 Installation
- 6
Wiring
- Connector description
- Block diagram
- Wiring guidelines
- Wiring procedure
- EMC-compliant wiring
- Power element
- Control element
- 6.7.1 Supply voltage 24 VDC
- 6.7.2 Digital inputs
- 6.7.3 Digital outputs
- 6.7.4 Analogue inputs
- 6.7.5 Encoder systems
- 6.7.5.1 Resolver
- 6.7.5.2 SinCos encoder with HIPERFACE interface
- 6.7.5.3 SinCos encoder with EnDat 2.1 interface
- 6.7.5.4 SinCos encoder with EnDat 2.2 interface
- 6.7.5.5 SinCos encoder with BISS interface, analogue
- 6.7.5.6 SinCos encoder with BISS interface, digital
- 6.7.5.7 SinCos encoder with SSI interface
- 6.7.5.8 SinCos encoder without data track
- 6.7.5.9 Incremental encoder ROD (AquadB) 5 V, 350 kHz
- 6.7.5.10 Incremental encoder ROD (AquadB) 5 V, 1.5 MHz
- 6.7.5.11 Absolute encoder with SSI interface
- 6.7.5.12 Electronic gearing, Master-Slave mode
- 6.7.5.13 Encoder emulation
- 6.7.6 Communication interfaces
- Expansion cards
- 7 Commissioning
- 8
Technical details
- PMCtendo DD5.03/230V
- PMCtendo DD5.06/230V
- PMCtendo DD5.10/230V
- PMCtendo DD5.01/480V
- PMCtendo DD5.03/480V
- PMCtendo DD5.06/480V
- 9 Appendix
- Contact address