Mini 2008 Cooper - Manual (Page 53)

Referenc
e
At
a
gl
an
c
e
Co
nt
r
o
ls
D
r
iv
ing
ti
p
s
Mob
il
ity
51
6 Adjusting settings
> Confirmation signals when locking and
unlocking the vehicle
20
> Response during unlocking
procedure
19
> Automatic locking 22
> Pathway lighting 66
> Daytime running lamps 67
> Triple turn signal activation 43
7 Setting the time 54
8 Setting the date 55
9 Exiting the menu
Exiting displays
1. Briefly press the button in the turn indicator
lever repeatedly until "HOME" is displayed.
2. Press the button for a longer period.
The display again shows the outside tempera-
ture and the time.
Displays are also exited if no entries are made
for approx. 8 seconds.
Next setting or item of information
1. Within a setting or item of information,
briefly press the button in the turn indicator
lever repeatedly until "NEXT" is displayed.
2. Press the button for a longer period.
The display changes directly to the next setting
or item of information.
Formats and units of
measure
To set the formats and units of measure. The set-
tings are stored for the remote control currently
in use, refer also to Personal Profile on page
18 .
1. Switch on the ignition, refer to page 39 .
2. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.
3. Press and hold the button until the display
changes.
Online Edition for Part no. 01 41 0 014 701 - © 11/07 BMW AG