Dynamic stability control (dsc) – Mini 2003 Cooper User Manual

Page 65

Advertising
background image

63

OVERVIEW

REPAIRS

OPERATION

CONTROLS

DATA

INDEX

DYNAMIC STABILITY CONTROL (DSC)

*

The concept

This system maintains driving stability
even in critical driving situations.

The system optimizes vehicle stability dur-
ing acceleration and when starting from a
full stop, as well as optimizing traction. In
addition, it recognizes unstable vehicle
conditions, such as understeering or over-
steering, and, as far as is possible within
the laws of physics, helps keep the vehicle
on a steady course by reducing the rpms
and by brake applications to the individual
wheels.

The DSC is operational every time you start
the engine. DSC contains the functions
Antilock Brake System (ABS), Electronic
Brake Force Distribution (EBD), and ASC+T.

The laws of physics cannot be
repealed, even with DSC. An appro-

priate driving style always remains the
responsibility of the driver. We therefore
urge you to avoid using the additional
safety margin of the system as an excuse
for taking risks.
Do not make any modifications to the DSC
system. Allow only authorized technicians
to perform service procedures on the
DSC.

<

Indicator lamp

The indicator lamp on the instru-
ment cluster will go out shortly
after the ignition has been

switched on, see pages

16

,

17

.

If the indicator lamp flashes:
DSC controls the drive and braking forces.

If the indicator lamp fails to go out
after the engine is started, or if it

comes on during normal driving and stays
on:
The system is defective or was turned off
using the button.
The described stabilizing operations are no
longer available.
The vehicle will remain completely opera-
tional, however, without DSC.
In the event of a malfunction, please see
your MINI Dealer, see pages

16

,

17

.

<

To switch off the DSC

Briefly press the switch.
The indicator lamp stays lit.

When driving with snow chains, it may be
effective to switch off the DSC for a brief
period.

To maintain stability, always drive
with the DSC switched on whenever

possible.

<

To switch DSC back on

Briefly press the switch once again.
Indicator lamp goes out.

ba.book Seite 63 Montag, 5. August 2002 8:09 20

Online Edition for Part-No. 01 41 0 156 890 - © 09/02 BMW AG

Advertising