Subaru 2004 Impreza - Manual (Page 163)

3-26
Instruments and controls
! Selector lever position indicator (AT
vehicles)
This indicator shows the position of the selector lever.
! Turn signal indicator lights
These lights show the operation of the turn signal or
lane change signal.
If the indicator lights do not blink or blink rapidly, the
turn signal bulb may be burned out. Replace the bulb
as soon as possible. Refer to the “Replacing bulbs”
section in chapter 11.
! High beam indicator light
This light shows that the headlights are in the high
beam mode.
This indicator light also comes on when the headlight
flasher is operated.
! Cruise control indicator light
This light comes on when the “CRUISE” main switch
is pressed.
! Cruise control set indicator light
This light comes on when vehicle speed has been set.
! Driver’s control center differen-
tial auto indicator light (WRX-STi)
This light functions while the ignition switch is ON.
When on, it indicates that the driver’s control center
differential is set to AUTO mode. It goes off when the
driver’s control center differential’s manual mode
switch is pressed. For details, refer to Chapter 7, “Driv-
er’s Control Center Differential (DCCD) (WRX-STi)”.
UG3030AA