Subaru 2004 Impreza User Manual

Page 237

Advertising
background image

5-24

Audio

! Tape program sensor button (TPS)

" Blank skip
When the “TPS” button (13) is pressed, the “TPS” in-

dicator will come on and the player will automatically

skip any blank portion of 15 second or more and play

the next program, even if it is on the other side. To

cancel blank skip mode, press the “TPS” button again.

" Blank search
Press “TPS” button (13) during playback to return to

the beginning of the current selection or to skip to the

beginning of the next selection. To use this function,

press the “TPS” button to turn on the “TPS” indicator.

If the fast-forward button “FF” (15) is then pressed, the

player advances the tape to the beginning of the next

selection and starts playing it. If the rewind button

“REW” (17) is pressed instead, the player rewinds the

tape to the beginning of the current selection and

starts replaying it. The “TPS” function may not operate

properly under the following conditions:
"

When the recording level is low.

"

When there are long pauses in the middle of a se-

lection.
"

When the tape contains verbal material such as

conversations.
"

When the blanks between selections are shorter

than five seconds.

"

When there are no blanks between selections (live

concerts, etc.).

! Repeat button (RPT)
Push the “RPT” button (11) to repeat the piece of mu-

sic being listened to. To use this function, push the

“RPT” button while the piece you want to hear again is

being played. “RPT” will be indicated on the display.

When the selection ends, the cassette player automat-

ically rewinds to the beginning of the piece and the se-

lection begins again. To cancel the repeat function,

push the “RPT” button again. Until the repeat function

is cancelled, the same piece of music will be repeated

indefinitely. The “RPT” function may not operate prop-

erly under the following conditions:
"

When the recording level is low.

"

When there are long pauses in the middle of a se-

lection.
"

When the tape contains verbal material such as

conversations.
"

When the blanks between selections are shorter

than five seconds.
"

When there are no blanks between selections (live

concerts, etc).

! Dolby B NR button (

)

Press “

” button (14) when playing tapes recorded

using the Dolby NR system*. The “

” indicator will

Advertising