MIPRO mr515a(2ce228) - Manual (Page 8)

1 3 14
NOTE BODYPACK TRANSMITTER
1. Pushing down both snap locks on the sides of battery cover to open battery
cover. Take out the batteries. Fig. 5).
2. Insert a two 1.5(AA) batteries into the battery compartment according to the
correct polarity as shown in Fig. 5). Then push up to close the battery
compartment as shown in Fig. 6).
4. BATTERY INSTALLATION
(Fig.5)
(Fig.6)
PS: When the microphone is not in use:
Make surethepowerofthemicrophoneisoff. Ifthemicrophone will not be
used for some time, please remove the batteries from the battery compartment
to avoid battery leakage and result in damaged battery springs and circuit. If a
rechargeable battery was used, take it out and recharge it.