Canon DR-5010C - Manual (Page 16)

14 Before Using the Scanner
Names and Functions of Parts
This section explains the name and function of each part. Familiarize yourself
with the parts before connecting the scanner.
■ Front (Feed Tray Open)
■ Controls
Document Eject Guide
Document Feed Tray
Place the document to
be scanned here.
(See p. 44.)
Document Feed
Tray Extension
Pull this tray out if
the document hangs
over the edge of the
main tray.
(See p. 44.)
Document Guides
Adjust them to align with the
width of the document.
Document Eject Tray 1
Scanned documents are
ejected here. (See p. 45.)
Document Eject Tray Extension
Open if the document extends beyond
the edge of the eject tray. (See p. 45.)
Attach it to prevent thin or long
documents from jamming when
being scanned. (See p. 47.)
Stop Button
Push it to stop
scanning.
Start Button
Push it to start
scanning.
Power Indicator
This indicator lights
when the scanner is
turned ON.
Power Switch
This switch is used to
turn the scanner on.
(See p. 25 and p. 27.)
Document Stopper
Moves up and down
according to the paper
feed switch lever.
(See p. 49.)
Feed Selection Lever
Use it to change the way the
documents are fed.
Move it up (
) to continuously feed documents
(page separation mode). (See p. 49.)
Move it down (
) to feed documents one at a
time or to feed documents that are
fastened together, such as invoices, without
separating them (Bypass Mode). (See p. 52.)