Canon DR-5010C - Manual (Page 90)

88 Specifications
24-bit Color Simplex
200 x 200 dpi 50 pages/minute
300 x 300 dpi 40 pages/minute
600 x 600 dpi 6 pages/minute
Duplex
200 x 200 dpi 100 images/minute
300 x 300 dpi 70 images/minute
600 x 600 dpi 16 images/minute
Amount of paper that can be 10 mm stack, maximum
stacked in automatic feeder (100 sheets of 20 lb bond (80 g/m 2 ))
Interface SCSI-III / Hi-Speed USB 2.0
Other Functions Double feed detection, skew detection
Dimensions (with trays closed) 15.6" x 12.3" x 7.5" (W x D x H)
398.4 mm x 312 mm x 191.4 mm (W x D x H)
Dimensions (with trays open) 15.6" x 26.3" x 7.6" (W x D x H)
398.4 mm x 668 mm x 194 mm (W x D x H)
Weight Approximately 23 lb (10.2 kg)
Power Supply AC 120 V (60 Hz) or AC 220-240 V (50 / 60 Hz)
Power Consumption 120 V model 220-240 V model
Scanning: 1 A maximum 0.5 A maximum
Standby: Under 4.2 W Under 4.2 W
Noise Not more than 61 dB
Operating Environment Temperature: 10˚C to 32.5˚C (50˚F to 90.5˚F)
Humidity: 20% to 80% RH
• The functions described above can be used if they are supported by the application
software.
• Some functions may not be available, depending on the performance of your PC and on
your software.
Due to our ongoing efforts to improve our products, the specifications described above are
subject to change without notice.
Options
Bar code module (product code: 0434B003)
Additional software to allow the ISIS/TWAIN driver to recognize bar codes.
Replacement parts
Exchange roller kit (product code: 0434B002)
Kit to replace the feed rollers (pickup roller, feed roller, and retard roller).
• Refer to “Removing and Attaching the Rollers,” on p. 67 for information about replacing
the rollers.
• Contact your local authorized Canon dealer or service representative for detailed
information about the options and replacement parts.