Canon DR-5010C - Manual (Page 25)

Installing the Scanner 23
Connecting USB Interface
USB Interface Connection
• Be sure to use the USB cable bundled with the scanner or a Hi-Speed
USB 2.0compatible cable.
• When using a USB extension card that supports Hi-Speed USB 2.0, be
sure to choose one verified for use with the scanner. (See “USB 2.0
Interface Card,” on p. 19.)
IMPORTANT
• If the operating system you are using is Windows NT, the connection via
USB is not supported. When using the DR-5010C with Windows NT, be
sure to connect the scanner via SCSI.
• When using a USB hub, be sure to use one compatible with USB 2.0.
Note
• The DR-5010C passed the Hi-Speed USB 2.0 certification test. However,
when you use the scanner with a personal computer equipped with USB 2.0
as standard, the scanner may not always operate normally.
• If the interface is not Hi-Speed USB 2.0 compatible, the scanning speed will
slow down.
Computer
DR-5010C
USB Cable