Alto Professional ELVIS 15SA MKII - Manual (Page 10)

8
Active, one subwoofer and two satellite speakers.
This is a very popular combination, especially in small size clubs where there is
no need for two subwoofers.
1). Connect one side of signal cable at your mixer into Main Output Left (with
1/4"Jack or XLR) and the other side of the cable into the Left Input of the
ELVIS active subwoofer. Repeat for the RIGHT channel. With the second
signal cable connect the Left Line Output of the subwoofer (Stereo/Mono
-Jack or XLR) to the Line input (COMBO) of the active satellite (with Stereo
-Jack or XLR). Repeat for the RIGHT channel
2). Connect the power cord to mains.
3). Turn on your mixer first, then the active speaker cabinets.
4). Turn up the volume control of the active speaker cabinets.
5). Use PFL function to get the proper input level for the mixer, and adjust the
Main Mix Level control to manipulate the output level.
6). After use, turn off your active speaker cabinets first, then the mixer.
LINE IN
LINE IN
LINE OUT LEFT LINE OUT RIGHT
ELVIS SUBWOOFER
HOOK
UP
3. QUICK START - ACTIVE SPEAKER CABINETS
LINE IN LEFT MAIN OUT LEFT
MAIN OUT RIGHT LINE IN RIGHT
MIXER