Alto Professional ELVIS 15SA MKII - Manual (Page 7)

5
HOOK
UP
3. QUICK START - ACTIVE SPEAKER CABINETS
Active, Full-range, two speakers. It is similar to the passive example but you
do not need a power amplifier in between the mixer and the 2 ELVIS speakers
Make all initial connections with all the equipment powered off, and ensure that
all the main volume controls are turned down completely.
1). Connect one side of the signal cable at your mixer into the Main Output Left
/ Right (with 1/4"Jack or XLR) and the other side of the cable in to the Line
Input (COMBO) of your ELVIS active speaker cabinet (with1/4"Jack or XLR).
2). Connect the power cord to mains.
3). Turn ON your mixer first, then the ELVIS cabinets.
4). Turn up the volume control of the ELVIS cabinets.
5). Use PFL function to get the proper input level for the mixer, and adjust the
Main Mix Level control to reach the desired output level.
6). After use, turn off your active speaker cabinets first, then the mixer.
MIXER
LINE IN LINE IN
MAIN OUT L MAIN OUT R