Atlona Fiber - Manual (Page 6)

Toll free: 1-877-536-3976
Local: 1-408-962-0515 atlona.com
6
For AT-HDF20S/AT-HDF20R:
• Transmits HDMI (Digital Video with Digital Audio) up to 1300ft away on a single Multi-Mode Fiber
Cable
• Supports Full HD Video with resolutions up to 1920x1200 or 1080p
• Supports high resolution Video VESA: 640x480, 800x600, 1024x768, 1280x800, 1280x768, 1280x1024,
1680x1050, 1600x1200, 1920x1080, 1920x1200, 480i/p, 720p, 1080i, 1080p (24, 30, 50, 60Hz)
• Supports HDCP 2.0
• Supports EDID
• Supports Digital Audio: up to Dolby True HD or DTS Master
• Supports 3D, all 7 formats are supported
• Small size allows to directly connect the transmitter or and receiver to the HDMI port on the source/
display
• The AT-HDF20S is compatible with AT-HDF20R, AT-HDFW10R, AT-DVIF20R and AT-DVIFW10R,
which means that the receiver module could either be HDMI or even HDMI as well as a wall plate
style DVI/HDMI receiver could be used. The AT-HDF20R (Receiver) could also be used with wall plate
or mini DVI/HDMI transmitters.
• Supports all VESA formats, perfect when used with specialized projectors or commercial LCD panels.
For AT-HDFW10S/AT-HDFW10R:
• Transmits HDMI (Digital Video with Digital Audio) up to 1300ft away on a single Multi-Mode Fiber
Cable
• Supports Full HD Video with resolutions up to 1920x1200 or 1080p
• Supports high resolution Video VESA: 640x480, 800x600, 1024x768, 1280x800, 1280x768, 1280x1024,
1680x1050, 1600x1200, 1920x1080, 1920x1200, 480i/p, 720p, 1080i, 1080p (24, 30, 50, 60Hz)
• Supports HDCP 2.0
• Supports EDID
• Supports Digital Audio: up to Dolby True HD or DTS Master
• Supports 3D, all 7 formats are supported
• Wall plate style
• The AT-HDFW10S is compatible with AT-HDFW10R, AT-HDF20R, AT-DVIF20R and AT-DVIFW10R,
which means that the receiver module could either be HDMI or even HDMI as well as a wall plate style
DVI/HDMI receiver could be used. The AT-HDFW10R (Receiver) could also be used with wall plate or
mini DVI/HDMI transmitters.
• Supports all VESA formats, perfect when used with specialized projectors or commercial LCD panels.
CONNECTION AND OPERATION
1. Connect the transmitter unit to the source
3. Connect the receiver module to the display
4. Connect both modules with supplied power supplies
6. You should receive an image on the display