Atlona AT VIDEO MATRIX - Manual (Page 3)

2 www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Safety Operation Guide
NOTICE
In order to ensure the credibility and the user’s safety, please comply with the following items during installa-
tion, maintenance and operation of the switch.
1. The switch must be in stable position. Use only the power supply that comes with unit. Do not use an
alternate as it may damage it.
2. Do not place the switcher near hot or cold surfaces or sources.
3. To avoid any damage by over heating, please keep the environment in good ventilation to radiate the
heat when running the switcher.
4. The switcher should be turned off when it is not used.
5. Please do not attempt to take cover off the switcher for there is a high-volt age component inside that
could cause electric shock.
6. Do not splash any liquid or chemical on or near the equipment.
7. Please make sure all the wiring are in working condition and are not cut or damaged.
This VGA Switchers User Manual can be used for other VGA matrix switcher models. This manual is only an
instruction for operators, not for any maintenance usage. Any changes of functions and parameters since
then will be informed separately. This manual is copyright Atlona Technologies. All rights reserved. No part of
this publication may be copied or reproduced without the prior written consent of Atlona Technologies.
Please check Atlona website updates.
http://www.atlona.com