Atlona AT LINE PRO4 - Manual (Page 3)

www.atlona.com | toll free: 1-877-536-3976
For International: 1- 408-962-0515
3
INTRODUCTION
PACKAGE CONTENTS:
The Atlona AT-LINE-PRO4 is a professional quality 10-input video scaler/processor that allows four
HDMI or DVI, three VGA, one component, one S-Video and one composite video input to be scaled to
a single HDMI output. The LINE-PRO4 also gives you the flexibility to add PAL or NTSC that may not
be native to your display. The onscreen display gives you the ability to change audio options, scaling
options, resolution switching and much much more. With additional functions as RS232 and IR the AT-
LINE-PRO4 is easier than ever to control or integrate with preexisting system.
• 10-Input Professional Video Scaler
• 5V/2.6A DC power adaptor
• Operations manual
FEATURES:
• Scaling any incoming Signal whether VGA, Composite, DVI or any other to the native resolution of the
display: VGA~WUXGA or 480p~1080p
• Analog to digital AV conversion
• PAL to NTSC and NTSC to PAL conversion 50/60Hz
• Digital and analog switching capabilities with HDMI out
• RS232 commands available for control systems
• Digital coax out for connecting your audio to an AV receiver
• Learnable IR codes for universal remote controls
• Standard 1U size for easy rack mounting
• 3.5mm Audio jacks for audio embedding on HDMI inputs (the main purchase for that is DVI sources
are used with HDMI/DVI adapters)
• Full 3D support on HMDI pass through
• Horizontal and vertical shift, color, tint, brightness, contrast, detail, sizing, and top and bottom vertical
blanking adjustments
• HDMI 1.3c, HDCP 1.1 and DVI 1.0 compliant
• VGA Inputs Supports following Resolutions: VGA ~WUXGA or 480p~1080p
• HDMI inputs support following resolutions: 480i~1080p and VGA~WUXGA
• Supports deep color of 8 / 10 / 12 bits per color (x3)
• On-Screen-Display allows users to fully adjust inputs/outputs preferences
• 3-D motion adaptive & 3-D video noise reduction