Atlona AT HD V40SRS - Manual (Page 3)

1
INTRODUCTION
FEATURES
Atlona Technologies Atlona’s AT-HD-V40SRS HDMI 1.3 over Single CAT5 Extender boosts up your
video/audio transmission distance up to 60m (200ft) in HDTV 1080i format, 40m (130ft) in HDTV
1080p format, and 20m (65ft) in HDTV 1080p with 36 bit color depth. With only one cost effective
solid Cat-5/5e/6 UTP/STP cable, users can readily extend HDTV sources from DVD players, Blu-ray
Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to distant display monitors
including HDMI or DVI enabled TV sets or LCD PC monitors.
With the state-of-the-art Silicon Image HDMI 1.3 chipsets equipped, deep color video, DTS-HD or
Dolby TrueHD audio, and HDCP supports and compatibility are all further insured. This flexibility
makes HDCP compliant BD players or PS3 transmit utmost high quality video and audio with a
greater distance at the minimal cost, when integrating several components apart.
The AT-HD-V40SRS includes two units: Sender (AT-HD-V40SS) and Receiver (AT-HD-V40RS) units.
The Sender unit is used to capture the input HDMI/DVI signals and carry the signals through one RJ-
45 connector into one cost effective solid Cat-5/5e/6 UTP/STP cable. The Receiver unit is responsible
for equalizing the sent TMDS multimedia data. The transmission distance between the sender and
receiver units can be up to 60m (200ft) under HD (720p/1080i) or 40m (130ft) under Full HD (1080p).
With an 8-level equalization control switch on the receiving unit, users can adjust the equalization
strength to the received TMDS signals accordingly, and therefore optimize the transmission distance
between source and destination.
 State-of-the-art Silicon Image (founder of HDMI) chipset embedded for utmost compatibility and
reliability
 HDMI 1.3c compliant
 Extend the transmission length up to 60m (200ft) from the HDMI sources under HD resolution
(1080i or 720p at 24-bit color depth)
 Extend the transmission length up to 40m (130ft) from the HDMI sources under Full HD
resolution (1080p at 24-bit color depth)
 Extend the transmission length up to 20m (65ft) from the HDMI sources under Full HD
resolution (1080p at 36-bit color depth)
 HDCP 1.1 compliant
 Minimize the cable skew by adjustable 8-level equalization rotary control
 Pure unaltered uncompressed 7.1ch digital HDMI over CAT5/6 cable transmission
 DTS-HD and Dolby True HD high bit rate audio support
 Allows cascading
 Wall mounting housing design for easy and robust installation
 Perfectly integrated with other HDMI over CAT5 series products
Note: The length depends on the characteristics and quality of the cables. Higher
resolutions and longer transmission distances require low skew cables (<25ns/100m)
for best performance. Unshielded CAT6 with metal RJ-45 connectors is recommended