AwoX StriimLIGHT WiFI - Manual (Page 6)

www.awoxstriim.com
6 | AwoX StriimLIGHT Wi-Fi - User Guide
EN
Note: Do not use any kind of dimmer switch other than the
provided remote control unit.
Changing the remote control battery
Starting your product
Screw your StriimLIGHT Wi-Fi device into a light socket and turn
on the power. Wait a few moments for the device to startup. At
first, a blue light will blink slowly. After starting, this light remains
blue continuously.
If your Internet router supports WPS
WPS is a feature that enables you to add new Wi-Fi devices to
your network at the touch of a button. If your Internet router
supports WPS, simply press the WPS button on the router and
then press the WPS button on your StriimLIGHT Wi-Fi device. The
two devices will recognize each other automatically and you may
begin using the AwoX Striim CONTROL application right away.
Otherwise, the installation wizard runs as described in the next
section.