Brennenstuhl Brobusta All-round Lamp RL E27 IP54 5m H07RN-F 3G1,5 max.60W - Manual (Page 6)

6
Brobusta RL Instruction Manual
Fig. 1a Fig. 1b
Information on possible fields of application
The lamp can be used standing, hanging or mounted on a tripod.
Position the lamp in a dry and plain area (Fig. 2).
The suspension hook is on the bottom of the lamp. When hanging up the lamp, pay
attention that the lamp is properly fixed and cannot fall off (Fig. 3). Click the suspension
hook back into place on the bottom of the lamp when you do not need the lamp any more.
The lamp can be mounted on a tripod on the feet at the bottom of the lamp by means of
adequate bolts (M6 thread) (Fig. 4). Recommended accessories: Tripod-assembly unit-Set
Article No. 1173206100. It is essential that the tripod stands in a stable position.
Fig. 2 Fig. 3 Fig. 4
The lamp can be switched on or off by means of the switch on the side. The power sockets
are ready for operation in any position.
013112 Brobusta RL 23.05.14 08:34 Seite 6