CIRCUTOR CPM (Available until stocks) User Manual
Page 19
Advertising
--------- MULTIMETER CURRENT CLAMP
CPM
-------- PG No. 18
-
4.- MAINTENANCE
Attention
: Disconnect the test probes before changing the battery or performing
any maintenance service.
4.1.- Battery replacement
When the symbol “
” appears on the lower left corner of the LCD indicator,
the batteries must be replaced:
1. Loosen the screws with a suitable screwdriver and remove the back cover.
2. Replace the battery with an IEC 6F22 9 V.
3. Close the back cover.
4.2.- Cleaning and storage
Caution
:
To clean the case, make sure that the equipment is disconnected.
Advertising