CIRCUTOR OT2-60D User Manual
Page 10
Advertising
DIELECTRIC STRENGTH TESTER FOR ISOLATING OILS OT2-60D --------- Page 10
Remarks:
If it is decided to transport the equipment outside the
enclosure of habitual use, is very important that the option of FRAGILE
TRANSPORT is used.
6.2.
Be sure that all the controls are off, in their de-energized or fully
counterclockwise position.
6.3.
Remove all components and oil vessels from the test chamber. Remember
that you have to quit the screws of transport box.
6.4.
Install the input line cord into the Input Power receptacle.
6.5.
Connect the line cord to a suitable (230v, see Specification Table) grounded
power source.
CAUTION - Disconnect all power before servicing!
Advertising