CIRCUTOR OT2-60D User Manual
Page 3
DIELECTRIC STRENGTH TESTER FOR ISOLATING OILS OT2-60D --------- Page 3
DIELECTRIC STRENGTH TESTER FOR ISOLATING OILS
OT2-60D
1. BASIC INSTRUCTIONS
1.1.
Delivery spot check
This manual is issued to help all the users to install and use the dielectric
strength tester for isolating oils OT2-60D, and also to help them to get the best
from it. After receiving the equipment, please check the following points:
(a) The equipment corresponds to your order specification
(b) Check if any damage was done during the shipment process
(c) Verify that you have received all the components specified on 2
nd
point.
1.2.
Connection procedures
The manual you hold in your hands contains information and warnings that the
user should respect in order to guarantee a proper operation of all the functions
of the OT2-60D and keep its safety conditions. Also you must follow the usual
security actions.
1.3.
Considerations related to the standards
All the comments and advices that you can read on this manual related to the
procedure that you must follow to do dielectric strength tests, are referred to the
IEC 156 standard, being only valid if you are following it. If you want to follow
another standard, the comments and advices of this manual can be different
(Go to 10
th
point).
2. VERIFICATION OF THE DELIVERIED COMPONENTS
When you receive the equipment, please check that the following components are
included
:
2.1.
OT2-60D equipment: