Part numbers 8. specification – CP Electronics MWS5 User Manual

Page 12

Advertising
background image

page 12

LOAD
6 Amps fluorescent and incandescent lighting.
3 Amps compact fluorescent lighting.
3 Amps low energy lighting.
3 Amps low voltage lighting (switch primary of transformer).
Switch SON lighting loads via a contactor.
-DD Digital Dimming output power supply versions - up to 10 dimming ballasts.
-AD Analogue Dimming output power supply versions - up to 10 dimming ballasts.

SUPPLY VOLTAGE

220-240 Volts AC 50 Hz

LIGHT LEVEL

Light to dark

TERMINAL CAPACITY 1.5mm

2

MATERIAL

Sensor head, surface mount baseplate, flush bracket — Flame retardant ABS

Power supply unit housing — Glass filled PA (polyamide)

Flange mount bracket & Lens—PMMA (Clear acrylic)

TYPE

Class 2

TEMPERATURE

-10°C to 80°C

SAFETY

The microwave radiation emitted by these units is exteremely low power. At a
distance of > 50mm the power density is <6% of the ANSI IEEE C95.1 –1991
recommended microwave power density. At a distance of 5mm from the unit it is
<84% of recommended power density.

CONFORMITY

EMC-89/336/EEC
LVD-73/23/EEC

9. Part Numbers

8. Specification

Sensor Head
MWS-5

Non-dimming sensor head with mounting brackets included

MWS5-D

Direct dim sensor head with mounting brackets included (suitable for –DD and –AD)

Power Supply Unit
MWS5-PSU

Non-dimming power supply unit (suitable for MWS5 sensor head)

MWS5-PSU-DD/SA Direct Dim power supply unit (suitable for MWS5–D sensor head)

with DSI / DALI digital dimming output

MWS5-PSU-AD/SA Dimming power supply unit (suitable for MWS5–D sensor head)

with 1-10V analogue dimming output


Accessories
DD-LCDHS

IR remote control programming handset with LCD screen

UHS

IR remote control user handset with lux and scene setting functionality

UHS3

IR remote control user handset with on/off override only

Ref #WD199 Issue 6

C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:

+ 44 (0) 333 900 0671

Fax:

+ 44 (0) 333 900 0674

www.cpelectronics.co.uk
[email protected]

IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE wiring regulations.

Due to our policy of continual product improvement CP Electronics reserves the right
to alter the specification of this product without prior notice.

FM 45789

EMS 534520

Advertising
This manual is related to the following products: