CP Electronics MWS5 - Manual (Page 2)

page 2
2. Dimensions & Mounting options
The product is supplied as two part numbers, and consists of the following parts:-

Power Supply Unit

Sensor Head with integral RJ11 sensor lead (300mm long) - plug into the separate power supply unit.

Flush Mount Bracket

Flange Mount Bracket

Surface Mount Baseplate
The flush mount bracket, flange mount bracket and surface mount baseplate are all supplied with the
sensor head. The power supply unit is packaged separately - therefore two part numbers need to be
ordered.
The direct dim and analogue dim variants of the detector have a dimming output that can be used to
control the light output of luminaires that are fitted with dimming ballasts. The detector measures the
overall light level in the detection area and calculates the correct output for the luminaires, to achieve a
preset lux level (maintained illuminance). The output level can be overridden using the switch input (see
page 5) or the user handset.
All products support presence and absence detection:-

Presence detection: when movement is detected the load will automatically turn on; when the area is
no longer occupied the load will automatically switch off after an adjustable time period has elapsed.

Absence detection: the load is manually switched on; when the area is no longer occupied the load will
automatically switch off after the adjustable time period has elapsed.
Switch operation:

MWS5 using a single switch: single press and release turns on, single press and release to turn off.

MWS5-DD & MWS5-AD using a single switch: single press and release to turn on, single press and
release to turn off, press and hold cycles dimming.

MWS5-DD & MWS5-AD using a two way switch: up button single press and release turns on, press and
hold to dim up. Down button single press and release turns off, press and hold dims down.
All switches must be momentary contacts.
1. Description and Operation cont.
Sensor head details Surface mount baseplate details