CRU RedPort SAS - Manual (Page 6)

CRU-WiebeTech
RedPort SAS 6G User Manual (A9-000-0017) REV 1.0 - 6 -
6. Technical Specifications
Product Name RedPort SAS 6G
Operating System
• Windows 7, Vista, XP (32-bit and 64-bit)
• Linux Red Hat Enterprise 5
• Linux SUSE Enterprise 10/10.3
Connectors
• 1 Mini SAS (x4) SFF-8088 External
• 1 Mini SAS (x4) SFF-8087 Internal
Ports 4 External/4 Internal
Bus Characteristics x8 PCIe 2.0
Data Rate Up to 6Gbps
Form Factor Low Profile
Dimensions 5.6” L x 2.73” H (142.24mm x 69.34mm)
Shipping Weight 1 pound
Compliance CE, FCC, RoHS
Support
We don’t expect anything to go wrong with your product. But if
it does, Tech Support is standing by and ready to help.
Contact us through wiebetech.com/techsupport.
Phone support also available at (866) 744-8722.
RedPort and WiebeTech are trademarks of CRU Acquisitions Group, LLC. Other marks are the property of their respective owners.
© 2008, 2011 CRU Acquisitions Group, LLC. All rights reserved.
Limited Product Warranty
CRU-DataPort (CRU) warrants this product to be free of significant defects in material and workmanship for a period of two years
from the original date of purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but
not limited to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights
with respect to the documentation and hardware. No CRU dealer, agent or employee is authorized to make any modification,
extension, or addition to this warranty. In no event will CRU or its suppliers be liable for any costs of procurement of substitute
products or services, lost profits, loss of information or data, computer malfunction, or any other special, indirect, consequential, or
incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service, even if CRU has
been advised of the possibility of such damages. In no case shall CRU’s liability exceed the actual money paid for the products at
issue. CRU reserves the right to make modifications and additions to this product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at this own
expense.
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately
5 inches from the DC plug.
4) Reorient or relocate the receiving antenna.
Tested to comply
with FCC standards
FOR OFFICE OR COMMERCIAL USE