CRU TeraCard E34-2S - Manual (Page 4)

User Manual for Express 34 Card A9-034-0001 REV 1.0
2.5. Verifying controller installation on Windows
Follow the instructions in this section to verify that the SiI3132 SATALink controller was installed
correctly.
1. Right click on 'My Computer' icon, select 'Properties', left click on 'Hardware' tab, and then on
'Device Manager' button.
2. Double click on 'SCSI and RAID Controllers', If there is no yellow '!' or '?' in front of 'Silicon
Image SiI3132 SATALink Controller' the driver has started correctly.
3. To view information about the devices attached to the controller, right click the 'Silicon Image
SiI3132 SATALink Controller' and select Properties from the context menu, then select the tab
labeled 'Device Info'.
4. Select a device to view using the ‘Location Control’ dropdown selection box.
2.6. Installing driver for Mac OS X
1. Copy the zip file to your desktop.
2. Double-click the file to decompress it. It should open automatically. Note: If you have an older
version of Stuffit installed, it may try and fail to open the file. If this happens, you will either need
to update the application, or temporarily disable it.
3. Double-click on PKG file to start the installation process.
4. Follow the on screen instructions until the process is complete.