CUE smartCUE Interfaces - Manual (Page 28)

28
smartCUE Interfaces | User Manual | Admin Web
© CUE, a.s. All Rights Reserved. | www.cuesystem.com | [email protected]
WiFi
This section is applied for wireless models only.
Insert an Network name (SSID). It is the name of the
network you want to access. It is used to identify different
wireless networks. It is case-sensitive and must not
exceed 32 alphanumeric characters, which may be any
keyboard character.
Select Network type Infrastructure or Ad-Hoc.
Select from the list-box the radio channel for the Ad Hoc
network. Configurable only when Network Type is set to
Ad-Hoc. The default value is 9.
Select Security type
▪ None
▪ WEP (Wired Equivalent Privacy 64-bit/128-bit)
▪ WPA-Personal (Wi-Fi Protected Access)
▪ WPA2-Personal (Wi-Fi Protected Access IEEE 802.11i)
Select Encryption type.
▪ TKIP (Temporal Key Integrity Protocol)
▪ AES (Advanced Encryption Standard) sometimes
labeled as CCMP (Counter Cipher Mode with Block
Chaining Message Authentication Code Protocol)
Select Security key.
▪ A WEP key is one of the following:
- 5 case-sensitive characters
- 13 case-sensitive characters
- 10 case-insensitive characters using 0-9, A-F
- 26 case-insensitive characters using 0-9, A-F
▪ A WPA-Personal password must be one of the
following:
- 8~63 case-sensitive characters
- 64 case-insensitive characters using 0-9, A-F
▪ A WPA2-Personal password must be one of the
following:
- 8~63 case-sensitive characters
- 64 case-insensitive characters using 0-9, A-F