Dataman 530 Series - Manual (Page 31)

DATAMAN 530 series AWG
User’s Guide
Fig. 5.2.10. – Using “Y” and “Z” constants
Figure 5.2.9. shows the example of using constants.
WARNING: The formulas are calculated in same order as they are defined in
the list. When any two sections overlap, the value of the last calculated formula is
used.
5.3. Freeform editor
The freeform editor allows you to modify existing waveforms. The main screen is
divided into several parts.
Fig. 5.3.1. – The freeform editor main screen
The top screen displays the whole waveform, while the bottom one displays selected
area of the waveform. To resize the selected area, follow these steps:
- Click button
- Select the area in the top screen by mouse
Click the button to activate the mode, where the waveform can be cyclically
moved on the X axis by dragging it. The actual shift of the waveform is displayed in
the “Position” edit box located in “Wave position” panel.
- 31 -