ILUMINARC Ilumipod™ 42 IP - Manual (Page 19)

Operation
Ilumipod 42 IP Optic Series User Manual Rev. 6 15
Menu Map (SpectraWhite™ Fixtures)
1 st Level Programming Levels Description
STAT
w (warm white)
000~255
Warm White and Cool White generate a white
temperature (0~100%)
C (cool white)
ST (strobe) 00~20 Strobe frequency (0~20 Hz)
RUN
dMX Operates with a DMX controller
SLAV Operates with a master fixture
dMX d.001~512 Sets the DMX starting address
PERS
STd.w 2 channels (WW & CW)
STd.d 3 channels (WW & CW, D)
STd.1 2 channels (WM, D)
STd.2 6 channels (WW, CW, WM, S, D, ID)
UNO 1-channel (dimmer)
Id Id.01~66 Assigns an ID address to the fixture
SET
UPLd (upload)
<Password>
Uploads custom program to another fixture
REST (reset) Resets the fixture to the default, factory settings
Id
(ID addressing)
ON/OFF Turns ID addressing on or off
POw (power)
HIGH High Output (Power consumption: 150 W)
NORM Normal Output (Power consumption: 90 W)
dIM
(dimmer speed) Off Makes dimmer curve linear
dIM1~4 Changes the dimmer curve (fast ó slow)
CAL1
wT.01~05
(white
temperature)
w
(warm white)
000~255
Modifies the white temperature used in the white
macros channel (STd.2, channel 4)
C
(cool white)
KEY ON/OFF Turns the password on or off