Junger Audio b45 - Digital Audio Delay - Manual (Page 30)

6. OPERATION
6.1
WORKING WITH
PRESETS
The digital audio delay b45 is a programmable audio delay.
It is to control by recalling of presets. It has four preset buttons
with which the appropriate preset is called on in each case. In a
preset, all parameters which can be adjusted at the device are
contained. Therefore, one will normally define four operating
states, to store them as presets. The desired device function
can then be activated fast and simply by calling the
corresponding preset (at the device or by external control). The
parameters displayed in the LCD display can be changed with
the PARAMETER knob.
PRESET 1...4 recall of programmed adjustments
of preset 1...4
push
6.2
RECALL OF
PRESETS
6.3
ADJUSTMENT OF
DELAY TIME
The delay time values in the LCD display can be changed with
the PARAMETER button.
CONTROL
selection of parameter, selected parameter
blinks on display
CONTROL
adjustment of selected parameter
(see also parameter overview)
push
turn
Note: After finishing of adjustment of delay time EXIT button
switches back to main display without permanent storage of
changed values. If you want to store adjusted delay time into
preset you have to store them by „learn preset key“-mode (see
5.4).
page 6-2 operation manual b45, chapter 6 -Operation-