KBC Networks WESII - Manual (Page 40)

WESII User Manual
Manual-WESII-Rev1403
Copyright © KBC Networks 2014
Page 39 of 140 www.kbcnetworks.com
Step 12: The WESII units will take approximately 2 minutes to connect to each
other. Once a connection has been made the RSSI LEDs on the back of the
unit will light to show the strength of the connection. See Section 7.
Step 13: You will now be able to connect to the Host unit via the Client across the
link that has been set up. To do this open another tab on your web
browser and access the Host on its 192.168.1.200 default address.
Unless a more advanced set up is desired, the antennas are configured for installation at
this point. For advanced configuration see Section 11.