KBC Networks WESII - Manual (Page 45)

WESII User Manual
Manual-WESII-Rev1403
Copyright © KBC Networks 2014
Page 44 of 140 www.kbcnetworks.com
Step 11: Enter the MAC address of the Client unit that the Host will connect to in
the ‘Remote Client-Lock to MAC’. This can be found on the ‘Status’ page of
the Client unit or on the rear label on the outside of the unit. The MAC
address must be entered in the following format: xx:xx:xx:xx:xx:xx.
Step 12: Apply Settings
Enter the Client MAC
address here
Select: <Apply Settings>